How To Eject Water from Inside Your iPhone Using the best Siri Shortcuts?

Remember the time when water and iPhones couldn’t mix? Pools, tubs, and toilets would suck down the iPhones of careless owners and spit out expensive paperweights like those were nothing. But now times have changed, and the newest iPhones can take a swim without fear of death. But a dip in the water now can cause distorted music and audio from the speakers which will decrease the audio quality.

Eject Water From iPhone
Image Credit

I don’t know about you guys, but I am that person who takes his smartphone and tries various photography especially with water, or takes it to shower to listen to my entire list of favorite songs. As a result, more often my iPhone X gets splashes of water and sometimes is dipped in water, so the water most of the time, goes inside the speaker grills at the bottom of the device.

 So, just like me, I am sure you must have tried looking for a solution to get the water out of the speaker grills. So here I am going to share some cool nifty Siri shortcut that draws the water out from the speaker using very low-frequency sound.


What’s the Shortcut?

While there exists more than one shortcut to handle this issue, the one that seems to have caught the internet’s attention is linked below. This shortcut acts like a very effective water eject tool on Apple Watches, playing a very bassy tone for about ten seconds, shaking water both out of the speaker as well as from any part of the device.

How to Eject Water From Your iPhone?

Also known as “Water Eject”, this Siri shortcut has been a smartphone-saver for me and many other people in the past few days, and here’s how you can use it.

  • Tap this link using your iPhone and it will redirect you to the “Water Eject” shortcut.
  • Once the page opens on the Shortcuts app, scroll all down to the bottom of the page.
  • Here you will get the button to add the shortcut.

Note: This is an untrusted shortcut and it will require you to turn on “Allow Untrusted Shortcuts” from your device settings.

Get Faster Access to the Shortcut (optional)

One of the best parts about shortcuts is that you can get easy access to them from various places. For example, you can access this shortcut from your Shortcuts app,  the Shortcuts widget, by using Hey Siri, or from a home screen icon. The first option is pretty obvious, and I’m sure you know how to add the Shortcuts widget to your Today View for easy and direct access from the lock screen.

After adding the shortcut to your library, tap on it to initiate on your device.

From the drop-down options, click on the  “Begin water ejection” and then wait for it to complete the process.

After completing, the Siri shortcut lowers the volume of your iPhone to fifty percent and delivers a completion notification to the user.

Now, as this is a Siri shortcut, you can always add it to your home page and it will be easier for you to access it. Or else, you can always ask Siri to run ‘Water Eject’ and it will automatically start the process.

Moreover, the Siri shortcut works on every iPhone model along with iPads and iPods running the latest software.

As for Hey Siri, you’ll need to press on 3D Touch devices or tap on the ellipsis (•••) on the “Water Eject” shortcut in the “Library” tab of Shortcuts. Then, click the “Settings” icon, and choose “Add to Siri.” Next, either click on the red record button and say your Siri phrase or click”Type Phrase” and type it out if you have Typed to Siri enabled. Click on “Done” three times to go back to the “Library” tab.

To add a home screen shortcut to Eject Water, go to the shortcut’s Settings page, but select “Add to Home Screen” this time. This will give you easy access to setting up a home screen icon for it, just like you would when making a home screen icon for a webpage.

Eject Water from Your iPhone

Now, all left to do is to use your new shortcut. Tap “Water Eject” from the “Library” view in Shortcuts, then click on “Begin Water Ejection” on the prompt. To bring up the “Begin Water Ejection”, you could also click on the “Water Eject” in the widget, you can use Hey Siri with your chosen Siri phrase, or click on the home screen icon if you made one.

After water ejection begins, you’ll hear a sharp pop, followed by the bassy tone. If you truly do have any water stuck in your speaker, it will begin to either leak or spray out of the bottom of your iPhone. I would recommend holding your iPhone at an angle, with your speaker facing downwards to the floor, as this can help force the water out of your speaker in the best possible manner.

Water Eject is a simple, yet very powerful Siri Shortcut built for iOS and is very efficiently designed to protect your Apple devices after being in contact with any water by generating an ultra-low 165Hz frequency sound wave that helps to remove moisture out from the speaker cavity system.

Water Eject has many advantages from being carefully built with a beautiful card design that gives users an easy-to-use interface, built-in update system which aims to give you the best user experience possible in a Siri Shortcut.

The enter shortcuts introduced in iOS 12, allow both developers and general users to access together simple-to-complex tasks for iPhones to help them process it easily. The best part? Shortcuts can be uploaded online to the web and can be shared with anyone with an iPhone running iOS 12 by installing the Shortcuts app. And this shortcut just happens to be a good one for ejecting water from an iPhone’s speakers.

Everything You Should Know About the Shortcuts App

To be clear, not all recent iPhones are equally created. While the iPhone XS and XS Max are IP68 water-resistant, the iPhone X, XR, 8, 8 Plus, 7, and 7 Plus are all IP67 water-resistant. While the others are still preferable to older iPhone models in terms of water protection, it certainly doesn’t equate to waterproof. In fact, IP68 isn’t “waterproof” either, it is just better protected than IP67. It’s because of this

I would never suggest anyone from dunking their iPhones underwater intentionally, as water damage is not covered under Apple’s warranty.

What should you expect to see while ejecting out water from your iPhone’s speaker?

The shortcut does a very good job of ejecting water from your iPhone’s speaker. However, it definitely isn’t the best one and will leave some remnants in the speaker after the tone has finished playing. But you can keep using the shortcut until you feel all the water is drained out, but if you ask me I won’t recommend you to continuously do it — the tone seems very much intense, and there’s no way to know if continuous use is bad for your iPhone’s speaker or not.

If you take my advice, Use it only when necessary, then dab the rest with a towel and wait for it to dry out. If your iPhone is IP68 or even IP67 resistant, it should be able to take care of itself in no time.

This shortcut is not the only way to get water out of your iPhone’s speaker. If you’d go through any solution found in the App Store, you can also check out another app called Sonic app. It invokes a similar kind of strategy to “Eject Water,” but unlike shortcuts, passed through Apple’s standards for its iOS marketplace.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top